Difference between revisions of "Raspberry Pi Compute"
Jump to navigation
Jump to search
Line 12: | Line 12: | ||
sudo apt-get -y install mosquitto | sudo apt-get -y install mosquitto | ||
sudo apt-get -y install pwgen | sudo apt-get -y install pwgen | ||
sudo apt-get install | sudo apt-get -y install wget | ||
sudo apt-get -y install zip | |||
sudo apt-get -y install build-essential cmake | |||
echo "Installing M-Bus Libraries..." | echo "Installing M-Bus Libraries..." | ||
sudo apt-get -y install git libtool libltdl-dev autoconf automake | sudo apt-get -y install git libtool libltdl-dev autoconf automake | ||
sudo git clone | sudo git clone https://github.com/rscada/libmbus.git | ||
cd libmbus | cd libmbus | ||
sudo sh clean.sh | sudo sh clean.sh |
Revision as of 19:20, 30 July 2022
https://www.waveshare.com/wiki/Write_Image_for_Compute_Module_Boards_eMMC_version
https://www.waveshare.com/wiki/CM4-DUAL-ETH-4G/5G-BASE
sudo apt-get update sudo apt-get upgrade bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered) sudo systemctl enable nodered.service
sudo apt-get -y install mosquitto sudo apt-get -y install pwgen sudo apt-get -y install wget sudo apt-get -y install zip
sudo apt-get -y install build-essential cmake echo "Installing M-Bus Libraries..." sudo apt-get -y install git libtool libltdl-dev autoconf automake sudo git clone https://github.com/rscada/libmbus.git cd libmbus sudo sh clean.sh sudo sh build.sh make sudo make install sudo ln -s /usr/local/lib/libmbus.so.0 /usr/lib/libmbus.so.0
mkdir /home/pi/node-hiu mkdir /home/pi/node-hiu/logs mkdir /home/pi/node-hiu/iHIU mkdir /home/pi/node-hiu/flows sudo chmod -R 775 /home/pi/node-hiu