Difference between revisions of "Solar Heat Energy Demonstrator"

From Open Source Controls Wiki
Jump to navigation Jump to search
Line 5: Line 5:
* Produce schematic of proposed design
* Produce schematic of proposed design
* Detailed design of pipework and equipment
* Detailed design of pipework and equipment
== Site Information ==
[[File:Shed1.png|none|thumb|742x742px|Google Earth]]
[[File:Shed2.png|none|thumb|742x742px|Google Earth]]


== Sizing ==
== Sizing ==

Revision as of 00:19, 11 June 2022

To Do:

  • Site visit
  • Review designs and calculate loads
  • Produce schematic of proposed design
  • Detailed design of pipework and equipment

Site Information

Google Earth
Google Earth

Sizing

Bivalent Systems

The following designs show the impact of a single 40kW heat pump on various numbers of properties.

Each property is 2 bedroom 3 person, and 4kW heating load.

Topping up boilers are included to achieve peak loads.

Caption text
Properties % Heat Pump Design Link
20 x 2B3P 99.9% https://hw7.ddns.net/ui/hndesign?loadCID=QmNg4trTmoxkD35qj4eBWd1exKwKfbVpP3jRNgEQwZn4qB
30 x 2B3P 94.6% https://hw7.ddns.net/ui/hndesign?loadCID=QmXz5H1sdV5F1juQrQc71PLjdWCPWkHhqHkitGbC8o8B9z
40 x 2B3P 83.6% https://hw7.ddns.net/ui/hndesign?loadCID=QmPgBB6jSXehwP2ZYp7LcZNQeEyXggQM4FPgcgdQWQgZVc

Bivalent40kw

Co2graph1.png

This graph shows how the vast majority of load (for 2021) is driven by heat pumps (blue & orange), with boilers (green) used to top up.

Heat Pump Selection

Mitsubishi Electric QAVG 40kW CO2 Air Source Heat Pump

Specifically designed for commercial sanitary hot water application, where gas boilers, combined heat and power systems (CHP) or electric water heating have been traditionally utilised, the QAHV provides a low carbon solution for hospitals, hotels, leisure centres and student accommodation. Utilising the natural and stable refrigerant CO2 (R744), the environmentally clean solution enables compliance to strict local planning laws and boosts BREEAM points. Compounded by the increasing decarbonisation of the electrical grid and the UK’s commitment to Net Zero 2050, the QAHV provides a high efficiency, low carbon hot water delivery solution with leaving water temperature up to 90°C.

QAHV_6PP_AW_v2
QAHV-N560YA-HPB_Service_Manual
QAHV-N560YA-HPB_Install_Manual
QAHV-N560YA-HPB-PI-SHEET


Qavh1.png