Raspberry Pi Compute

https://www.waveshare.com/wiki/Write_Image_for_Compute_Module_Boards_eMMC_version

https://www.waveshare.com/wiki/CM4-DUAL-ETH-4G/5G-BASE

Setup

Install image to Compute using imager software.

https://www.raspberrypi.com/software/

sudo apt-get update
sudo apt-get upgrade
bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
sudo systemctl enable nodered.service

sudo apt-get -y install mosquitto
sudo apt-get -y install pwgen
sudo apt-get -y install wget
sudo apt-get -y install zip

sudo apt-get -y install build-essential cmake
echo "Installing M-Bus Libraries..."
sudo apt-get -y install git libtool libltdl-dev autoconf automake
sudo git clone https://github.com/rscada/libmbus.git
cd libmbus
sudo sh clean.sh
sudo sh build.sh
make
sudo make install
sudo ln -s /usr/local/lib/libmbus.so.0 /usr/lib/libmbus.so.0

mkdir /home/pi/node-hiu
mkdir /home/pi/node-hiu/logs
mkdir /home/pi/node-hiu/iHIU
mkdir /home/pi/node-hiu/flows
sudo chmod -R 775 /home/pi/node-hiu