Difference between revisions of "Open Control Architecture"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
e.g. a message with a topic '''''myNetwork'''/'''node123'''/'''myDevice'''/'''dat'''/'''outputTemperature''''' would be stored in '''''readings'''.'''myNetwork'''.'''myDevice'''.'''dat'''.'''outputTemperature'''.'''value''''' | e.g. a message with a topic '''''myNetwork'''/'''node123'''/'''myDevice'''/'''dat'''/'''outputTemperature''''' would be stored in (global.)'''''readings'''.'''myNetwork'''.'''myDevice'''.'''dat'''.'''outputTemperature'''.'''value''''' | ||
Revision as of 16:15, 29 May 2022
The Open Controls described on this site works as follows:
- Communications between systems is performed using MQTT using a standardised 5 level topic structure. network / node / device / group / key.
- A device managing communications is called a node.
- Data from within a node or from connected devices is assigned a local network identifier of "local" so that the node can separate internal traffic and readings from general traffic. This is stored under global.localNetworkId
- The external network identifier is stored under global.networkId
- The node identifier is stored under global.node
- Attributes for data may be loaded from a central index (GitHub hosted), providing additional information such as units and descriptions. This is to avoid the need to locally describe data, and to assist in compatibility.
- Controls software is written in Node-RED.
- Within Node-RED, data and attributes are stored within the global.readings object.
- Data within the readings object is nested according to the topic (excluding the node as more than one node may publish data on a device).
e.g. a message with a topic myNetwork/node123/myDevice/dat/outputTemperature would be stored in (global.)readings.myNetwork.myDevice.dat.outputTemperature.value